Sine wave inverter 24V / 230V 600W
JOKER24-600

Technical data

Nominal input voltage 24V
Input voltage range 21 –32V (44V max.)
Continuous power @ 25°C 500VA
Power 30 min. @ 25°C 600VA
Power 5 min. @ 25°C 675VA
Power 5 sec. @ 25°C 1200VA
Max asymmetrical load 300VA
Short circuit current 2s (output) 5.7A
Output voltage True sine 230Vac 0 / -10%
Frequency 50Hz ± 0.05% (Crystal control)
Distortion THD (on resistive load) < 5% (@ Pnom)
Consumption in « Stand-by » mode 0.4W
Consumption « ON » @ no load 8.5W
Maximum efficiency 94%
Max continuous Cos ? 0.1 – 1 up to 500VA
Load detection Adjustable: 1 ? 20W
Overheating protection (+/-5°C) Shut down @ 75 °C – Auto-restart @ 70°C
Overload protection Automatic disconnection with 2 time restart attempt
Short circuit protection Automatic disconnection with 2 time restart attempt
Reverse polarity protection Protected by internal fuse
Back feed protection Not protected
Battery deep discharge protection Shut off @ 0.87 x Unom – Automatic restart @ Unom
Over voltage shut down Shut off @ >1.33 x Unom - Automatic restart @ < Umax
Acoustic warning Before low battery or overheating disconnection
Cable length(Battery / AC out) 1.5m / 1m
Noise > 45 dB (Ventilation)
Operating temperature -20°C up to +50°C
Approx. output power derating -1.5%/°C since +25°C
IP protection index IP 30 conforms to DIN 40050
Forced ventilation From 45°C ± 5°C
Required battery capacity > 5 x Pnom/Unom (recommended value in Ah)
Weight & dimensions 4.5 kg – 142mm x 240mm x 84mm
Warranty 2 years
E norm ECE-R 10 (E24) certification for 12 and 24V models
EC conformity compliance EN 61000-6-1, EN 61000-6-3, EN 55014, EN 55022, EN 61000-3-2,
Dir. 89/336/EEC, LVD 73/23/EEC